Dingoo DUAL-BOOT LINUX WITHOUT USB CABLE (STEP BY STEP VIDEOS)
I HAVE GOT A GOOD NEWS GUYS, SOON I WILL BE POSTING A VIDEO WITH STEP BY STEP PROCEDURE FOR LOADING LINUX. ALSO, I WILLBE SHOWING HOW TO RUN EMULATORS WITHOUT THE USB CABLE. YOU WILL BE ABLE TO LOAD LINUX AND SNES9X EMULATOR WITHOUT THE USB CABLE ON YOUR DINGOO. KEEP YOUR EYES OPEN.......SOON....BECAUSE I HAVE JUST GOT MINE DINGOO RUNNING LINUX AND SNES9X EMULATOR, THEREFORE, I ALSO WANT OTHER PEOPLE TO LEARN IT AND EJNOY IT. I HAD TO SPENT COUPLE OF DAYS TO FIGURE IT OUT HOW TO DO IT. FINALLY, I HAVE DONE IT AND SOON YOU WILL GET IT TOO. SO, JUST WAIT.........
Yeah the video will help. I got linux up and booting but it wont mount the root fs as rwx only readonly so no duke nukem for me. The rest of the stuff works by putting it in the home dir :)
I am looking forward to this! A walkthrough will hit the spot nicely!
For those using the SNES9X Emu on Linux, is it capable of running the games that the default emulator on the A320 cannot? Also, does Dingux care which version of the A320 you have?
Hi! THIS IS Z_MAN3007 AGAIN. I AM BACK WITH MY FIRST PART OF THE VIDEO, "HOW TO LOAD DINGOO LINUX FIRMWARE ON YOUR DINGOO A320"
IN MY VIDEO I HAVE PROMISED YOU TO GIVE YOU ALL THE DOWNLOAD LINKS. ALSO, I AM GIVING YOU THE COMMANDS THAT I HAVE TYPE IN FOR THE DINGOO LINUX FIRMWARE INSTALLATION.
DINGOO LINUX STEP BY STEP - PART ONE
DINGOO LINUX STEP BY STEP - PART TWO
DINGOO LINUX STEP BY STEP - PART THREE
LINK TO THE FILES:
HERE___________________________________
HERE ARE THE COMMANDDS:
boot 0
load 0x080600000 zImage_dual_boot_installter_ILI9331 0 (PLEASE USE YOUR LCD CONTROLLER ID)
go 0x80600000 0
ALSO, I AM WORKING ON THE NEXT SET VIDEO WHICH WILL SHOW YOU HOW TO LOAD LINUX ON YOUR MINI-SD CARD. ALSO, I WILL SHOW YOU HOW RUN EMULATORS USING LINUX AND WITHOUT USING USB CABLE. PLEASE KEEP YOUR EYES OPEN. THANKS.
HERE IS MY EMAIL ADDRESS YOU CAN CONTACT ME ANYTIME: z_man3007@yahoo.com
Well done...thanks!!
Hello Zman,
Nice tutorial
Hello Driller,
I have a question? I just installed the Dual Boot and everything worked as planned. Then i prepaired my 2gb Micro Sandisk 64MB as the first (Fat32) Partition and the 800MB on ext3 partition. Now, i put the zImage on the first (fat32) partition and put the latest Rootfs and extracted onto ext3 partition. While holding the "Select button" while first turning on the Dingoo, i get the Dingux screen, it loads , then it FLASHES. I got it to a point where linux boot screen is booting and loads the lifes, but then it stops right there and keeps
flashing continuously. The last line says "Kernel Panic - Not syncing: NO
init found. Try passing init= option to kernel" Any idea whats causing this??? Any help would be Greatly appreciated .
Regards
RxM
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
NOTE: IF YOU CANNOT SEE MY POSTS PROPERLY PLEASE GO TO THIS LINK BELOW:
http://a320.freeforums.org/step-by-step-dingoo-linux-installation-video-t759.html
Folks, this is Z_MAN3007 is here. Here is my final released of the Dingoo Linux videos. I have total of 11 videos for this last tutorial. If you follow my video tutorial you will be able to load complete linux and run emulators on your Dingoo. Here is the links......I hope you all will enjoy and any questions feel free to ask at z_man300@yahoo.com" There are few folks sent me email earlier today I will answer all your questions shortly. Today, I was very busy to complete this video. Here are the video links.
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
http://www.youtube.com/watch?v=TIYFdmfK3-w - Part 1
http://www.youtube.com/watch?v=SQ0B2biYAjw - Part 2
http://www.youtube.com/watch?v=zEeijeg90vw - Part 3
http://www.youtube.com/watch?v=YIiQovR0QXc - Part 4
http://www.youtube.com/watch?v=I5YzakWWRv4 - Part 5
http://www.youtube.com/watch?v=JcaqZjOpdgo - Part 6
http://www.youtube.com/watch?v=R4OhPCUCA7w - Part 7
http://www.youtube.com/watch?v=NNFe5Qxw-eI - Part 8
http://www.youtube.com/watch?v=7_D88Zt_VJg - Part 9
http://www.youtube.com/watch?v=-52hZo4HEV8 - Part 10
http://www.youtube.com/watch?v=si0MsMaRbCs - Part 11
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
Here is the /etc/inittab file:
OPEN YOUR inittab file and delete all the lines and than paste it. Make sure you first delete all the contents of the inittab file before you paste.
_______START OF THE FILE (DO NOT COPY THIS LINE)______________
# /etc/inittab
#
# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
#
# Note: BusyBox init doesn't support runlevels. The runlevels field is
# completely ignored by BusyBox init. If you want runlevels, use
# sysvinit.
#
# Format for each entry: <id>:<runlevels>:<action>:<process>
#
# id == tty to run on, or empty for /dev/console
# runlevels == ignored
# action == one of sysinit, respawn, askfirst, wait, and once
# process == program to run
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
::sysinit:/etc/init.d/rcS
::sysinit:/bin/mount -o remount,rw /
::sysinit:/bin/mount -t vfat /dev/mmcblk0p1 /mnt/fat
::sysinit:/bin/cp /mnt/fat/history /root/.ash_history
::sysinit:/bin/login -f root
::sysinit:/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
::restart:/sbin/init
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
::respawn:/sbin/getty 57600 /dev/tty0
::respawn:/sbin/getty 57600 /dev/ttyS0 vt102
::respawn:/sbin/getty 57600 /dev/ttygserial
# Put a getty on the serial port
ttyS0::respawn:/sbin/getty -L ttyS0 57600 vt100 # GENERIC_SERIAL
STOP
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
PLEASE EDIT /root/etc/init.d/rcS file and you must copy and paste these 2 lines at the end of the file
export SDL_NOMOUSE=1
cd /root/dmenu ; ./dmenu&
Links to LCD Controller:
http://dingoo-linux.googlecode.com/files/zImage-20090707-ILI9331
http://dingoo-linux.googlecode.com/files/zImage-20090707-ILI9325
http://dl.openhandhelds.org/cgi-bin/dingoo.cgi?0,0,0,0,14,98
ENJOY......I WILL BE COMING BACK WITH A VIDEO HOW TO RUN MAME. JUST KEEP YOUR EYES OPEN.
PLEASE DO NOT USE THE FOLLOWING
TUTORIALS BECAUSE DINGUX WORKS
FINE WITH WINDOWS.......
NOTE: IF YOU NEED HELP PLEASE VISIT THIS WEB SITE:
http://Dingoo-scene.blogspot.com/
"Hello Driller,
I have a question? I just installed the Dual Boot and everything worked as planned. Then i prepaired my 2gb Micro Sandisk 64MB as the first (Fat32) Partition and the 800MB on ext3 partition. Now, i put the zImage on the first (fat32) partition and put the latest Rootfs and extracted onto ext3 partition. While holding the "Select button" while first turning on the Dingoo, i get the Dingux screen, it loads , then it FLASHES. I got it to a point where linux boot screen is booting and loads the lifes, but then it stops right there and keeps
flashing continuously. The last line says "Kernel Panic - Not syncing: NO
init found. Try passing init= option to kernel" Any idea whats causing this??? Any help would be Greatly appreciated .
Regards
RxM"
______________________________________________________________
Follow my rest of the tutorials in here:
http://a320.freeforums.org/step-by-step-dingoo-linux-installation-video-t759.html
NOTE: IF YOU DO IT THE WAY I HAVE SHOWN YOU IN MY VIDEO TUTORIAL THAN YOU SOULDN'T HAVE ANY PROBLEMS.
Thanks z-man
Ive tried following the translated one to no avail.
That video will help a lot people
Thanks